A hotel SSID is enabled only on the 6 GHz band. A laptop that has only 2.4 GHz and 5 GHz radios cannot join it. Which limitation explains that?
Select an answer to reveal the explanation.
Short Explanation
You cannot tune a radio to a station it was never built to receive. A 6 GHz-only network is invisible to a laptop that stops at 5 GHz. Channel 1 is not a 6 GHz channel, hiding a name is not what the stem describes, and the security suite is not the reason this radio is deaf.
Full Explanation
Wi-Fi in the 6 GHz band needs a radio that supports 6 GHz. The hotel SSID is enabled only there, and the laptop has only 2.4 GHz and 5 GHz radios, so it cannot hear or join that SSID. Channel 1 is a 2.4 GHz channel. It is not the channel number you use to join a 6 GHz-only network. Hiding an SSID stops the name from being broadcast and does not selectively block 5 GHz radios. The stem does not say the name is hidden. WPA3 is an encryption and authentication suite. Turning it off is not what gives a 2.4 GHz radio the ability to hear 6 GHz. Exam caveat: a dual-band SSID that also exists on 5 GHz would let this laptop join the 5 GHz copy. The stem says the SSID is 6 GHz only. Operational check: add a 5 GHz or 2.4 GHz copy of the SSID for older clients, or replace the laptop radio, and confirm the old laptop associates. On the access point, confirm the SSID is bound only to the 6 GHz radio, then associate a 6 GHz client as the control test. Leave a 5 GHz SSID in place until every laptop that must connect has a 6 GHz radio.